FURUTECH
e-TP60
Power Distributor
The e-TP60 is a
sophisticated, luxuriously made single-chassis power distributor that
eliminates many common problems found in audio and video components caused by
massively contaminated electrical power lines.
The AC waveform
becomes severely distorted by ground noise, voltage spikes and sags, high
frequency power supply noise from other components in your own system, plus
radiated high frequency digital noise from processors and digital
interconnects. There are also distortion products at the top and bottom of the
AC waveform created by switch-mode power supplies in electronic devices on the
same circuit. Additionally, you’re never alone; your residential AC mains
supply is shared with other apartments, homes, and businesses on the same
utility transformer. That’s why many audio and video enthusiasts notice their
systems are more enjoyable late at night or on weekends!
How can you tell
you’re a victim of polluted AC power? Listen and look for these symptoms: Flat,
hard, and grainy high frequencies, a thick and bloated midrange, fat,
uncontrolled bass, and loss of air and soundstage stability. On video displays
the picture resolution is less than sharp, with “ghosting”, color shift,
“snow”, or vertical and horizontal lines. If this looks and sounds familiar,
you need Furutech!
Total Attention to Detail and Build Quality
Many A/V enthusiasts go to great lengths to carefully set up major system
components, but pay little attention to the source, the AC power. Furutech
knows that each and every part of the chain is as important as the next, so
maximum attention is lavished on all aspects
of AC power transfer.
The beautifully crafted special grade aluminum plate chassis effectively
shields against another common problem, RFI (Radio Frequency Interference) and
a layer of Formula GC-303 blocks EMI (Electro Magnetic Interference). Internal
wiring is Furutech μ-14 conductor shielded with Special Polyethylene, guaranteeing
low electrical resistance.
Furutech Hyper Quality High Performance 24k Gold-plated Duplex
Receptacles are wired to the
High Performance 24k Gold-plated IEC inlet of the e-TP60. The receptacles feature 24k
Gold -plated phosphor bronze, non-magnetic conductors for stable, long lasting,
optimized power transfer.
Formula GC-303
GC-303 is a special material Furutech bonds to the interior bottom-plate
of the chassis that absorbs EMI (Electromagnetic Interference) generated by the
internal fittings of the unit. The e-TP60 uses
no filtering besides Formula GC-303 so AC resistance is kept to a minimum (see
below), allowing a more resolving, powerful, dynamic, and colorful performance
from your components.
Furutech’s
Two-Stage Cryogenic and Demagnetizing Alpha
Process
Using cutting-edge
technology and materials, Furutech developed a low-temperature two-stage
process that significantly improves every facet of audio and video performance.
The treatment begins during the manufacturing process with a deep, conditioning
cryogenic freeze of all metal parts. Using high-end refrigerants -- liquid N2
or He -- Furutech achieves temperatures of between -196 to -250C. The treated parts
actually change their molecular structure at these extremes of temperature
relieving internal stress. The molecules bond together more tightly and the
overall structure becomes more stable. This improves electrical conductivity
and so power and signal transfer.
Step two in the Alpha Process exposes these same parts
to the patented Ring
Demagnetization treatment. Ordinary high power magnets used for this purpose
often increase magnetic effects; they
leave some areas more magnetized than others. This patented process uses controlled attenuation to
completely eliminate magnetization for immediately more vivid and colorful
improvements. Ring Demagnetization further enhances conductivity of all treated
materials. The patent holder for this treatment is Sekiguchi Machine Sale Co., Ltd. in
The Final Result
The 2-Step Alpha Cryogenic and
Demagnetizing Process works in tandem with other designed-in features to create
the most optimized AC power transfer possible. Furutech’s scientific outlook,
total awareness and devotion to detail results in a greater sense of power,
dynamics, and resolution, with cleaner, blacker backgrounds and a larger, more
stable soundstage, vivid tonal colors and deeper extension at both ends of the
frequency range. The e-TP60 will allow the delicacy, refinement and nuance of a
performance through, along with micro- and macro-dynamics that will leave you
breathlessly engaged. Displays of all types will exhibit greater, sharper
resolution with less ghosting, color shift, “snow”, or vertical and horizontal
lines.
SPECIFICATION
|
TYPE SPECIFICATION |
e-TP60 |
TYPE SPECIFICATION |
e-TP60 |
||
|
|
VOLTAGE |
AC 125V 50/60Hz |
|
MOVEMENT TEMP. |
-10℃~40℃ |
|
CURRENT |
15 A |
PRESERVATIVE
TEMP. |
-20℃~50℃ |
||
|
LOADING WATT. |
1875 W |
BODY MATERIAL |
Aluminum Alloy plate (Black Painted) |
||
|
GROUNDING OUTLET |
6 Outlets |
OUTWARD SIZE |
200(W)X130(D)X60(H) mm |
||
|
FILTER TYPE |
GC-303 Absorbs EMI |
WEIGHT |
0.94Kgs |
||
All Metal
Parts Treated With
FURUTECH
Alpha Cryogenic and Demagnetizing Treatment
FURUTECH reserves the right to
change product specifications without prior notice.
FURUTECH CO.,
www.furutech.com
service@Furutech.com
Make A More Powerful
Connection with Furutech!